Treatment Of Fractures Research Articles

Spatiotemporal Characterization of Microstructure Morphology, Mechanical Properties and Bone Remodeling of Rat Tibia Under Uniaxial Compressive Overload Loading.

Bone tissue is subjected to increased mechanical stress during high-intensity work. Inadequate bone remodeling reparability can result in the continuous accumulation of microdamage, leading to stress fractures. The aim of this work was to investigate the characteristics and repair mechanisms of tibial microdamage under several degrees of overload. Also, we aimed at better understanding the effects of overload on the multi-scale structure and mechanical properties of bone. Sixty 5-month female rats were divided into three groups with different time points. Micro-CT was used to evaluate the three-dimensional microstructure, and three-point bending, quasi-static fracture toughness and creep mechanical test were carried out to evaluate the mechanical properties. SEM was used to observe the morphological characteristics of fracture surfaces. Section staining was used to count the microdamage parameters and numbers of osteoblasts and osteoclasts. The microarchitectures of cancellous and cortical bones in the three overload groups showed different degrees of damage. Overload led to a messy crystal structure of cortical bone, with slender microcracks mixed in, and a large number of broken fibers of cancellous bone. The properties associated with the elastic plasticity, fracture toughness, and viscoelasticity of cortical bone reduced in three groups, with that corresponding to day 30 presenting the highest damage. The accumulation of microdamage mainly occurred in the first 14days, that is, the crack density peaked on day 14. Peak-targeted bone remodeling of cortical and cancellous bones occurred mainly between days 14 and 30. The influence of overload mechanical environment on bone quality at different time points was deeply investigated, which is of great significance for the etiology and treatment of stress fractures.

Treatment of Complex Central Talar Fractures with Lateral Plate Combination with Medial Screw Fixation.

The treatment of talar neck and/or body fractures is known to be difficult and challenging, with significant impact on the long-term functional outcome for the patient. The optimal management, including the choice of surgical approaches and implants, are still under constant discussion. The purpose of the study was to investigate the clinical effects of lateral mini-plate combined with medial lag screws for the treatment of complicated central talar fractures. The data of eight patients with complex central talus fractures treated between June 2019 and January 2021 were retrospectively analyzed. There were six males and two females, ranging in age from 15 to 66 years, with an average age of 37.4 years. There were three cases on the left and five cases on the right. All fractures were comminuted, including talar neck with talar body fracture in seven cases and talar body comminuted with subluxation of subtalar joint in one case. All patients were treated with the anteromedial combined anterolateral approach, lateral talar mini-plate fixation and medial lag screw fixation. Fracture reduction quality, union time, and complications were recorded, and functional outcomes were evaluated using the American Orthopedic Foot & Ankle Society (AOFAS) scoring system. The time from injury to surgery was 1-6 days, with an average of 3.38 days. The follow-up period was 34-53 months (mean 44.88 months). All fractures healed with a mean healing time of 16.75 weeks (13-23 weeks). Anatomical reduction was observed in six cases and near in two cases. After operation, there was no loosening or breakage of implant, loss of fracture reduction, and irritation of skin and soft tissue by internal fixation. The average AOFAS score was 87.38 (48-100), with excellent five cases, good two cases and poor one case, and the excellent and good rate was 87.5%. Superficial skin necrosis in one surgical incision healed after dressing exchange. No deep infection occurred. One case (1/8, 12.5%) developed avascular necrosis of the talus without collapse. Posttraumatic arthritis was found in four cases (4/8, 50%). The utilization of lateral mini-plates in combination with medial screws for treating complex central talar fractures results in satisfactory reduction and stable fixation, mitigating complications associated with poor reduction. However, due to the absence of an anatomical mini-plate, pre-contouring is necessary when applying the lateral plate. This demands a surgeon's thorough familiarity with the anatomical morphology of the talus and proficiency in surgical techniques. Posttraumatic arthritis is the most common complication of complex central talar fractures.

The use of intramedullary reduction techniques in the treatment of irreducible intertrochanteric femoral fractures with negative medial cortical support

ObjectiveTo explore the clinical efficacy of intramedullary reduction techniques for irreducible intertrochanteric femoral fractures with negative medial cortical support.MethodsA retrospective analysis was conducted on 69 patients with irreducible intertrochanteric femoral fractures with negative medial cortical support treated in the Department of Orthopedics at Jiangsu Province Hospital (The First Affiliated Hospital of Nanjing Medical University) from July 2019 to December 2021. Patients were divided into Group A and Group B. Group A (experimental group) consisted of 36 cases with an average age of 76.2 ± 5.9 years, while Group B (control group) comprised 33 cases with an average age of 76.6 ± 6.3 years. Group A received treatment using intramedullary reduction techniques, while Group B received treatment using traditional extramedullary reduction techniques. Both groups achieved anatomic reduction of the medial cortex or slight positive support. Surgical duration, intraoperative fracture reduction time, intraoperative bleeding, intraoperative fluoroscopy time, fracture reduction quality, fracture healing, postoperative neck-shaft angle loss, femoral neck shortening, and hip joint functional recovery score (FRS) were compared between the two groups.ResultsAll patients were followed up for an average of 13.8 months. Group A showed superior outcomes compared to Group B in surgical duration, intraoperative fracture reduction time, intraoperative bleeding, intraoperative fluoroscopy time, fracture reduction quality, fracture healing, postoperative neck-shaft angle loss, and femoral neck shortening (P < 0.05). Hip joint function assessed by functional recovery score was better in Group A than Group B at 1 and 3 months postoperatively (P < 0.05), with no significant statistical difference at other time points (P > 0.05).ConclusionFor irreducible intertrochanteric femoral fractures with negative medial cortical support, intramedullary reduction techniques used during surgery demonstrated simplicity, significant reduction in surgical duration, decreased intraoperative bleeding, fewer amounts of intraoperative fluoroscopy, improved fracture reduction quality, and reduced surgical complexity. Further clinical research and application are warranted.

Biomechanical analysis of a new cannulated screw for unstable femoral neck fractures

BackgroundThe treatment of unstable femoral neck fractures (FNFs) remains a challenge. In this study, a new cannulated screw for unstable FNFs was designed to provide a new approach for the clinical treatment of these injuries, and its biomechanical stability was analyzed using finite element analysis and mechanical tests.MethodsAn unstable FNF model was established. An internal fixation model with parallel inverted triangular cannulated screws (CSs) and a configuration with two superior cannulated screws and one inferior new cannulated screw (NCS) were used. The biomechanical properties of the two fixation methods were compared and analyzed by using finite element analysis and mechanical tests.ResultsThe NCS model outperformed the CSs model in terms of strain and stress distribution in computer-simulated reconstruction of the inverted triangular cannulated screw fixation model for unstable FNFs. In the biomechanical test, the NCS group showed significantly smaller average femoral deformation (1.08 ± 0.15 mm vs. 1.50 ± 0.37 mm) and fracture line displacement (1.43 ± 0.30 mm vs. 2.01 ± 0.47 mm). In the NCS group, the mean stiffness was significantly higher than that in the CSs group (729.37 ± 82.20 N/mm vs. 544.83 ± 116.07 N/mm), and the mean compression distance was significantly lower than that in the CSs group (2.87 ± 0.30 mm vs. 4.04 ± 1.09 mm).ConclusionThe NCS combined with two ordinary cannulated screws in an inverted triangle structure to fix unstable FNFs can provide better biomechanical stability than CSs and exhibit a length- and angle-stable construct to prevent significant femoral neck shortening.

Comparing the Outcomes of Titanium and Stainless Steel Flexible Nails in Repairing Pediatric Long Bone Fractures

Background Traditionally, pediatric femoral fracture treatment favored conservative methods, relying on casting and the inherent bone remodeling ability in immature bones. Surgical intervention was deferred until age 6, as nonoperative approaches often resulted in complications. Titanium elastic nailing (TENS) emerged as an effective treatment for diaphyseal femoral fractures in ages 6 to 16. However, the choice between TENS and stainless steel elastic nailing (SSENS) remains debated due to inconsistent findings. Objective This study aimed to evaluate the effectiveness of both nailing systems in pediatric long bone fractures. Methods A retrospective chart review at William Beaumont Hospital Royal Oak included 83 patients aged 6 to 16 treated with TENS or SSENS between January 2011 and January 2021. Data collected encompassed nail related issues, time to fracture union, full weight bearing, and nail removal. Results In the TENS group (n=29), the average age was 8.8±2.4 years, and the average BMI was 17.2±3.4. The SSENS group (n=54) had an average age of 9.3±2.7 and an average BMI of 19.7±8.4. Time to fracture union for TENS was 93.8±60.5 days, while SSENS was 82.2±40.0 days. Conclusion This study found no statistically significant differences in nail-related complications, time to fracture union, full weight bearing, or nail removal between TENS and SSENS in pediatric long bone fractures. The choice between these systems should be based on individual circumstances. Limitations include a small sample size and the study’s retrospective nature.

Outcomes of 15 dogs and two cats with metabone fractures treated with fluoroscopically guided normograde metabone pinning.

To report the outcomes of 15 dogs and two cats with metabone fractures treated with fluoroscopically guided normograde metabone pinning (FGNMP). Retrospective case series. A total of 15 client owned dogs and two cats with 57 metabone fractures. Description of FGNMP and reporting of the following data: signalment, pre- and postoperative radiographs, intramedullary pin diameter used, anesthesia, surgery and coaptation times, duration to normal weightbearing and bone union, postoperative care and complications. Median surgery time was 54 min (range: 26-99), median duration of coaptation was 14 days (range: 1-5 weeks), median time to normal weightbearing was 16 days (range: 2-45) and median time to bone union was 6 weeks (range: 4-12). All cases had at least 12 months of post-surgical follow-up with a median follow-up of 18 months (range: 12-70). No major complications occurred. Mild radiographic changes associated with subchondral bone sclerosis were noted on follow-up radiographs in 13/57 fractures. All cases returned to normal gait and full (15) or acceptable (2) function. In this study, FGNMP was an effective and safe technique for metabone fracture repair, requiring only short-term external coaptation in most patients. Time to bone union and return to normal function compared favorably to previously reported techniques. Fluoroscopically guided normograde metabone pinning provides an alternative technique for treatment of metabone fractures.

Biomechanical changes in the proximal femur before and after removal of femoral neck system

BackgroundAs an innovative internal fixation system, FNS (femoral neck system) is increasingly being utilized by surgeons for the treatment of femoral neck fractures. At present, there have been numerous finite element analysis experiments studying the immediate stability of FNS and CSS in treating femoral neck fractures. However, there is scarce mechanical analysis available regarding the effects post internal fixation removal. This study aimed to investigate the alterations in mechanical parameters of the proximal femur before and after the removal of FNS (femoral neck system), and to assess potential distinctions in indicators following the extraction of CSS (Cannulated Screws).MethodsA proximal femur model was reconstructed using finite element numerical techniques. The models for CSS and FNS were formulated utilizing characteristics and parametric definitions. The internal fixation was combined with a normal proximal femur model to simulate the healing state after fracture surgery. Within the framework of static analysis, consistent stress burdens were applied across the entirety of the models. The total deformation and equivalent stress of the proximal femur were recorded before and after the removal of internal fixation.ResultsUnder the standing condition, the total deformation of the model before and after removing CSS was 0.99 mm and 1.10 mm, respectively, indicating an increase of 12%. The total deformation of the model before and after removing FNS was 0.65 mm and 0.76 mm, respectively, indicating an increase of 17%. The equivalent stress for CSS and FNS were 55.21 MPa and 250.67 MPa, respectively. The average equivalent stress on the cross-section of the femoral neck before and after removal of CSS was 7.76 MPa and 6.11 MPa, respectively. The average equivalent stress on the cross-section of the femoral neck before and after removal of FNS was 9.89 MPa and 8.79 MPa, respectively.ConclusionsThe retention of internal fixation may contribute to improved stability of the proximal femur. However, there still existed risks of stress concentration in internal fixation and stress shielding in the proximal femur. Compared to CSS, the removal of FNS results in larger bone tunnels and insufficient model stability. Further clinical interventions are recommended to address this issue.

Maisonneuve fracture treated with short leg cast: A case report with 41-month follow-up.

Maisonneuve fracture is a specific type of severe ankle injury. To our current knowledge, once a Maisonneuve fracture is diagnosed, the surgery is always recommended for fear of sequelae from inaccurate joint reconstruction. However, in this case, we treated a Maisonneuve fracture with a short leg cast, and the 41-month follow-up showed a favorable outcome with no post-traumatic osteoarthritis, chronic pain, and instability. Therefore, this case provides evidence for the feasibility of conservative treatment of Maisonneuve fracture. A female patient in her early twenties sprained her left ankle while running, suffering regional pain, swelling, and limited mobility. We diagnosed a Maisonneuve fracture with superior fibular fracture and Volkmann tuberosity fracture, a slight separation of inferior tibiofibular syndesmosis (ITS). The patient rejected our surgical recommendations in favor of nonsurgical treatment, in addition to refusing immobilization of the knee. Consequently, we had to treat her with a short leg cast for 8 weeks and asked her to return for regular follow-up visits. At the final follow-up, the radiography showed complete healing of proximal fibula fracture. The patient reported no discernible subjective differences between her bilateral ankles. The range of motion of the left ankle was measured at 22° of dorsiflexion and 40° of plantarflexion. Functional assessments using Olerud-Molander ankle scale and American Orthopedic Foot and Ankle Society Ankle-Hindfoot scale both scored 100 points. Additionally, the radiographic assessment classified arthritis as stage 0 according to Morrey-Wiedeman classification. To avoid missing and misdiagnosing, the physical examination should always extend to 2 neighboring joints. Secondly, if a Maisonneuve fracture is suspected, further computed tomography scans, radiography, and magnetic resonance imaging can help to determine the stability of the ITS and the integrity of the lateral collateral ligaments before making therapeutic decisions. Finally, considering the lateral collateral ligaments may remain intact, we recommend stabilizing ITS by repairing the medial ligaments, which can be conducted arthroscopically and be more minimally invasive, providing an elastic fixation that aligns better with the biomechanics of the ITS which is characterized as a micro-mobile rather than fully fixed joint.

ACCIDENTAL PENILE FRACTURE CAUSED BY SELF-INVOLVEMENT IN THE ABSENCE OF SEXUAL ACTIVITY: A CASE REPORT

Objective: This study aims to present a case of accidental penile fracture without sexual activity. Case(s) Presentation: A 40-year-old guy was sent to our emergency center nine hours prior to admission with oedema and lack of tumescence on the penis. There were no records of sexual activity or masturbation. The patient was treated for a hematoma and a fracture. The patient raised no complaints during his one-week and two-month follow-up visits after the procedure. Discussion: A urological emergency involving penile fracture is uncommon. It is important to avoid unnecessary delays in obtaining medical help. In the current case study, with urgent surgical intervention, corporal tears were repaired. Recent research recommends prompt surgical treatment of penile fractures, as this appears to be associated with fewer complications and better results. Conclusion: A penile fracture that requires immediate surgical treatment can preserve erectile and voiding function. Keyword: Penile fracture, urological emergency, surgical treatment.

Enhancing percutaneous kyphoplasty efficacy in elderly osteoporotic fractures through optimal cement filling ratio

ObjectiveTo explore the appropriate bone cement filling ratio in percutaneous kyphoplasty (PKP) for the treatment of osteoporotic vertebral compression fractures (OVCF).MethodsClinical and radiological data from 150 OVCF patients treated with PKP were retrospectively analyzed. Patients were categorized into three groups based on bone cement filling ratio: low (<0.4), medium (0.4-0.6), and high (>0.6) filling ratio groups. The clinical characteristics (age, gender, BMI, etc.) and related study data (bone cement leakage and its location, pre/post-operative Visual Analogue Scale (VAS), pre/post-operative Oswestry Disability Index (ODI), vertebral height restoration, kyphotic Cobb angle, etc.) among the three groups were compared using statistical software to compare to identify the most appropriate cement filling ratio.ResultsThe 0.4-0.6 group presented a lower cement leakage rate compared to the >0.6 group, and there were no significant differences in pre-operative VAS, post-operative day 2 VAS, post-operative month 1 VAS, and pre-operative ODI (p>0.05). However, significant differences were observed in post-operative month 3 VAS (p=0.002), post-operative day 2 ODI (p=0.002), post-operative month 1 ODI (p<0.001), and post-operative month 3 ODI (p<0.001). The “0.4-0.6” group showed better pain improvement and functional recovery compared with the “>0.6” group at the 3-month follow-up. While presenting the best vertebral height restoration, the “>0.6” group also exhibited the greatest variability. Additionally, no significant difference in Cobb angle changes was observed among the groups.ConclusionA bone cement filling ratio of 0.4-0.6 in PKP treatment for OVCF strikes a favorable balance between complication reduction and positive patient outcomes, warranting it as an optimal filling volume.

Effect of Different Treatment Modalities for Condylar Fractures in Childhood on Mandibular Symmetry and Temporomandibular Joint Function: A Retrospective Study.

In a retrospective study of the effects of different treatment modalities of condylar fractures in childhood on mandibular symmetry and temporomandibular function, the cases selected for this article were adult patients who had sustained a condylar fracture in childhood. The aim was to investigate the effects of condylar fractures in children on the development and function of the mandible and their specific manifestations after the completion of mandibular development. According to the different treatment modalities, the patients were divided into the conservative treatment group and the open surgical treatment group, and the effects of the 2 treatment modalities on the patients' condylar healing, the difference in growth ability, and the symmetry of the jaws were evaluated. The effects of different treatment modalities of children's condylar fracture on the growth, development, and function of the mandible were investigated using the Ai and Di, the grading of the imaging results, and the 3-dimensional CT fixation measurements from the aspects of both clinical examination and imaging examination. The 2 groups had condylar malalignment and condylar morphology abnormality, and there was one case of joint ankylosis in the surgical treatment group. There was a statistical difference in the evaluation of condylar reconstruction between the 2 groups, and the condylar reconstruction in the surgical treatment group was better than that in the conservative treatment, and there was a statistical difference between the condylar length, condylar width, condylar height, and depth of TMJ fossa between the healthy side and the affected side in the closed treatment group. There was a statistical difference in the height of the mandibular ascending branch between the healthy side and the affected side, and the unilateral condylar fracture was treated conservatively; the difference in the bony chin point deviation between the 2 groups was not statistically significant. In children, after conservative treatment of condylar fracture, the growth of condylar process is poor, and the condylar shape and position are not as good as surgical repositioning, but through the proliferation of temporomandibular joint fossa, it can make up for the insufficient height of condylar process, which has no effect on the symmetry of the mandible, and the surgical treatment can achieve good anatomical repositioning, which has a greater effect on the symmetry of the mandible than the conservative treatment.

Aftermath Türkiye’s double earthquake: detailed analysis of fracture characteristics and acute management from a level I trauma center

BackgroundThis research investigated surgical interventions for the treatment of extremity and pelvic fractures and aimed to provide an analysis of management challenges under crisis conditions in a Level I Trauma Center after Türkiye’s February 6, 2023, earthquakes.MethodsThe study was a retrospective examination of the medical records of 243 fracture cases associated with the earthquakes. The age, gender, time of admission, types of extremity and pelvic fractures, anatomical localizations, and surgical treatment methods for fractures were recorded. The results of these parameters were evaluated in detail, together with the results of other surgical treatments performed in the hospital in the first week after the disaster, such as fasciotomy, amputation, and wound debridement.ResultsMost of the 243 (119 males and 124 females) patients with extremity fractures and pelvic fractures receiving surgical treatment were adults (n = 182, 74.9%). The most common lower extremity fractures among all fracture cases were tibial shaft (30.8%) and femoral shaft (20.6%) fractures. A total of 33 patients had surgical procedures for the treatment of two or more significant bone fractures involving either the extremity or the pelvic ring. The analysis showed that the median age of patients who underwent surgery due to extremity and pelvic fractures was 36 years, with a range of 1 to 91 years, which was statistically increased compared to patients who received surgery for other musculoskeletal injuries such as fasciotomy, amputation and debridement (p < 0.001).ConclusionFractures were one of the most common musculoskeletal injuries in the first days after earthquakes, and the management of fractures differs significantly from soft tissue injuries and amputation surgeries as they require implants, special instruments, and imaging devices. The delivery of healthcare is often critically impaired after a severe earthquake. Shortages of consumables such as orthopedic implants, power drills, fluoroscopy equipment, and the need for additional staff should be addressed immediately after the earthquake, ideally by the end of the first day.

Effect of Elevated Blood Glucose on Postoperative Complications Among Diabetic Patients After Surgical Treatment of Torsional Ankle Fracture.

This study aims to evaluate the association of elevated blood glucose and postoperative complications among diabetic patients after surgical treatment of torsional ankle fracture. This was a retrospective study of consecutive diabetic patients treated surgically for a torsional ankle injury between January 2017 and December 2021 at a large tertiary hospital. All patients who met inclusion and exclusion criteria were divided into a high-HbA1c group or a low-HbA1c group according to the HbA1c cutoff of 7.0% within 3 months of operation, then a propensity score match was performed to control potential confounding factors. The primary outcomes were postoperative complications, and secondary outcomes were unplanned secondary procedures. A matched cohort of 238 patients was finally included, with 119 patients with high HbA1c levels and 119 with low HbA1c levels. Patients with high HbA1c levels experienced more complications (31.1% vs 18.5%, P < .01) and more secondary procedures (22.7% and 8.4%, P < .01) than those with low HbA1c levels. Multivariate logistic regression indicated that patients with high HbA1c levels were significantly associated with higher proportions of any complications (OR 2.25, 95% CI 1.08-4.69; P = .03), superficial infection (OR 4.03, 95% CI 2.13-5.41; P < .01), deep infection (OR 1.42, 95% CI 1.23-2.02; P < .01), and any unplanned secondary operations (OR 3.72, 95% CI 1.62-8.52; P < .01) compared with those with low HbA1c levels after controlling for potential confounders. Multivariate linear regression showed that high HbA1c levels were significantly associated with a higher number of complications (β = 4.61, 95% CI 2.63-18.18; P < .01) and a higher number of secondary procedures (β = 4.44, 95% CI 2.79-10.87; P < .01). Patients with an HbA1c >7.0% within 3 months of operation are more likely to have a wound issue/infection and more likely to undergo a secondary procedure after surgical treatment of torsional ankle fractures in diabetic patients than patients with an HbA1c ≤7.0% within 3 months of operation. Level III, retrospective cohort study.

Treatment of femoral neck fractures using actis stem: complication rate in 188 uncemented hemiarthroplasties.

Cemented hemiarthroplasty (HA) is preferred in treating dislocated femoral neck fractures in elderly, osteoporotic patients, since uncemented HA was associated with mechanical complications more frequently. Cementation can conversely cause cardiopulmonary complications, leading to demand on safe, uncemented implants addressing osteoporosis. This study is set up as a retrospective feasibility study on the use of an uncemented, collared wedge implant (Actis®, DePuy Synthes, Warsaw, IN), for HA in elderly patients, focusing on complication rate. From 1,194 patients, treated with HA in two study centers between 2017-2022, 188 received Actis® uncemented stem with bipolar head. Complete follow-up were retrospectively collected in all patients. In 188 patients (f: 64.9%; age: 83.1 ± 7.7a) included, no case of intra-operative mortality was recorded. 2day mortality was 1.1%, 30day mortality was 7.4% and 1year mortality was 28.2%. 2 (1.1%) intra-operative fractures did not receive surgical revision, 3 (1.6%) post-operative periprosthetic fractures caused separate admission and revision. 2 cases (1.1%) of early infection required surgical revision. Our data provide proof of concept, that Actis® Stem allows an alternative, uncemented treatment option for displaced femoral neck fractures with HA. In case of preoperative or intraoperative medial cortical bone defects, stability of this implant is deteriorated.

In vivo axial load-share ratio measurement using a novel hexapod system for safe external fixator removal

BackgroundExternal fixation is widely used in the treatment of traumatic fractures; however, orthopedic surgeons encounter challenges in deciding the optimal time for fixator removal. The axial load-share ratio (LS) of the fixator is a quantitative index to evaluate the stiffness of callus healing. This paper introduces an innovative method for measuring the LS and assesses the method’s feasibility and efficacy. Based on a novel hexapod LS-measurement system, the proposed method is to improve the convenience and precision of measuring LS in vivo, hence facilitating the safe removal of external fixators.MethodsA novel hexapod system is introduced, including its composition, theoretical model, and method for LS measurement. We conducted a retrospective study on 82 patients with tibial fractures treated by the Taylor Spatial Frame in our hospital from September 2018 to June 2020, of which 35 took LS measurements with our novel method (Group I), and 47 were with the traditional method (Group II). The external fixator was removed when the measurement outcome (LS < 10%) was consistent with the surgeon’s diagnosis based on the clinical and radiological assessment (bone union achieved).ResultsNo significant difference was found in the fracture healing time (mean 25.3 weeks vs. 24.9 weeks, P > 0.05), frame-wearing duration (mean 25.5 weeks vs. 25.8 weeks, P > 0.05), or LS measurement frequency (mean 1.1 times vs. 1.2 times, P > 0.05). The measurement system installation time in Group I was significantly shorter compared to Group II (mean 14.8 min vs. 81.3 min, P < 0.001). The LS value of the first measurement in Group I was lower than that of Group II (mean 5.1% vs. 6.9%, P = 0.011). In Group I, the refracture rate was 0, but in Group II it was 4.3% (2/47, P > 0.05).ConclusionThe novel hexapod LS-measurement system and involved method demonstrated enhanced convenience and precision in measuring the LS of the external fixator in vivo. The LS measurement indicates the callus stiffness of fracture healing, and is applicable to evaluate the safety of removing the fixator. Consequently, it is highly recommended for widespread adoption in clinical practice.

Challenges in the Surgical Orthopedic Treatment of Long Bone Fracture in a Rare Case of Pycnodysostosis

Pycnodysostosis is a rare autosomal recessive disorder caused by an inactivating mutation in cathepsin K (CTSK) and characterized by dysmorphic facial features, a short stature, acro-osteolysis, osteosclerosis with increased bone fragility, and delayed closure of cranial sutures. Although the satisfying healing potential, many issues exist in managing fractures in pycnodysostosis patients. In this paper, we report the challenges faced in managing a fracture of the femoral shaft in a 14-year-old boy coming from a low-income family. The patient was administered to the Paediatric Surgical Emergency Department of the Children's Hospital in Rabat for the management of a closed fracture of the left femur. Despite being of small stature with dysmorphic facial features, a prominent forehead, and brachydactyly, he never had a medical consultation before. The patient then underwent a surgical reduction. We attempted titanium elastic nail fixation, but metaphyseal drilling was not feasible due to the high bone density, and the narrow medullary canal eliminated this option. Therefore we opted for the palate fixation. Sclerotic bone made drilling extremely difficult. The postoperative fracture was successfully healed.

Associated Factor and Long-Term Clinical Outcomes for Patients with Postoperative Rotational Malreduction in Pediatric Supracondylar Humeral Fractures

Background and Objectives: Long-term outcomes of immediately postoperative rotational malreduction in the axial plane after operative treatment of supracondylar humeral fractures (SCHF) are unknown. This study aimed to investigate the long-term clinical outcomes and associated factors for immediately postoperative rotational malreduction of SCHF. Materials and methods: In this retrospective case–control study, 88 patients who underwent surgery for Gratland type III SCHF were enrolled between January 2012 and January 2020. Among them, 49 patients had immediately postoperative malrotational reduction (rotational malreduction group) and 39 patients had no rotational deformity (control group). To evaluate the associated factors for immediately postoperative rotational malreduction, demographic data, fracture patterns, physical examination signs, and preoperative radiological parameters were analyzed. To compare the clinical outcomes, operation time, range of motion of the elbow, time from operation to full range of motion, and Flynn criteria were evaluated. The Oxford elbow score was used to investigate long-term clinical outcomes for patients five years after operation. Results: The mean age was 5.7 ± 2.3 years and mean follow-up period was 15.7 ± 4.0 months. The rotational malreduction group had significantly more patients with oblique fracture pattern (p = 0.031) and Pucker sign (p = 0.016) and showed a significantly longer operative time (p = 0.029) than the control group. Although there was no significant difference in the range of elbow motion and the Flynn criteria, the Kaplan–Meier survival curve showed a longer time to recover the full range of elbow motion in the rotational malreduction group (p = 0.040). There were no significant differences in the long-term clinical outcomes assessed using the Oxford elbow score (p = 0.684). Conclusions: Oblique fracture pattern and Pucker sign may be associated with immediately postoperative rotational malreduction in the axial plane. Although patients with immediately postoperative rotational malreduction showed favorable results of long-term clinical outcomes, they required more weeks to recover the full range of elbow motion.

Biomechanical Effect of Different Posterior Fixation Techniques on Stability and Adjacent Segment Degeneration in Treating Thoracolumbar Burst Fracture With Osteoporosis: A Finite Element Analysis.

Finite element analysis. To investigate the biomechanical effect of four posterior fixation tcehniques on stability and adjacent segment degeneration in treating thoracolumbar burst fractures with osteoporosis. In terms of stability and adjacent segment degeneration, there remains no consensus or guidelines on the optimal technique for the treatment of thoracolumbar burst fractures in patients with osteoporosis. Images of CT scans were imported into MIMICS and further processed by Geomagic to build 3-dimensional models of the T10-L5 region. A v-shaped osteotomy was performed on the L1 vertebral body to simulate a burst fracture in the setting of osteoporosis. Subsequently, four fixation techniques were designed using SolidWorks software. Range of motion (ROM) of the global spine, ROM distribution, ROM of adjacent segment, Von Mises stress on adjacent intervertebral discs and facet joints were analyzed. Among the four groups, the cortical bone screw fixation (CBT) showed the highest global ROM at 1.86°, while long-segmented pedicle screw fixation (LSPS) had the lowest global ROM at 1.25°. The LSPS had the smallest percentage of ROM of fractured vertebral body to fixed segment at 75.04%, suggesting the highest stability after fixation. The maximum ROM of the adjacent segment was observed in the CBT at 1.32°, while the LSPS exhibited the smallest at 0.89°. However, the LSPS group experienced larger maximum stress on the adjacent intervertebral discs (9.60MPa) and facet joints (3.36MPa), indicating an increasing risk of adjacent segment disease. LSPS provided the greatest stability, while CBT provided the smallest amount of stability. However, the elevated stress on adjacent intervertebral discs and facet joints after LSPS fixation increased the possibility of adjacent segment degeneration. Cement-augmented pedicle screw fixation (CAS) and combined cortical bone screw and pedicle screw fixation (CBT-PS) demonstrated significant biomechanical advantages in providing moderate fixation strength while reducing stress on the intervertebral discs and facet joints.

Application and Perspectives: Magnesium Materials in Bone Regeneration.

The field of bone regeneration has always been a hot and difficult research area, and there is no perfect strategy at present. As a new type of biodegradable material, magnesium alloys have excellent mechanical properties and bone promoting ability. Compared with other inert metals, magnesium alloys have significant advantages and broad application prospects in the field of bone regeneration. By searching the official Web sites and databases of various funds, this paper summarizes the research status of magnesium composites in the field of bone regeneration and introduces the latest scientific research achievements and clinical transformations of scholars in various countries and regions, such as improving the corrosion resistance of magnesium alloys by adding coatings. Finally, this paper points out the current problems and challenges, aiming to provide ideas and help for the development of new strategies for the treatment of bone defects and fractures.

Serial Change in Patellar Height after Tension Band Wiring of Patellar Fractures

Background and Objectives: Patella baja is a common complication after operative treatment for patellar fracture. This study aimed to investigate (1) the serial changes in patellar height and (2) the potential predictive factors for patellar height changes after tension band wiring (TBW) for patellar fractures. Materials and Methods: Forty-one patients who underwent TBW for patellar fracture between March 2019 and September 2022 were enrolled. To identify serial changes in patellar height, modified Blackburne–Peel index (mBPI) was assessed at just after surgery, at 3 months, at 6 months, at 1 year and at the final follow-up. Multiple regression analysis was conducted to identify factors correlated with mBPI difference between the contralateral side (considered as preoperative status) and injured side. Results: The postoperative mBPI exhibited a decline over time (mean mBPI immediately post operation/3 months/6 months/1 year/final follow-up: 0.69/0.63/0.63/0.62/0.61) Specifically, mBPI showed a significant reduction immediately post operation to 3 months (p &lt; 0.001), although comparisons at other time points did not reveal significant differences. A lower position of the fracture was associated with a decrease in patellar height after surgery. Conclusions: Patellar height was mainly decreased from immediately post operation to 3 months. A fracture in a lower position of associated with decreased patellar height after the TBW of the transverse patellar fracture.